Emergency Cold Room Repair:
Having a warm cold room can be very frustrating as your hard work over the week will be undone in one night. Your food and medicine will spoil and orders will start to build up as your stock will no longer be usable. Having a calm approach and quickly contacting Emergency Cold Room Repair will help you to sort out this issue. We have outlined what you should do below.
What Does Emergency Cold Room Repair Mean for Your Business?
An experienced engineer will come to your business quickly. A regular service can be schedule
d for next week however in the case of a breakdown emergency services can be contacted. The higher the temperature of your cold room goes and the longer fans aren’t running the more time you have lost. Restaurants, butchers, florists and pharmacies all rely on having a constant cold temperature. Knowing what emergency repair means will help you feel confident.
How Can You Spot the Warning Signs of Cooling Failure?
Often there will be signs that your cold room isn’t working properly. You may notice a loud knocking sound coming from the compressor, build up of thick ice on the evaporator coil and the display showing numbers increasing each hour. You may also notice dampness on your walls and door seals. A bad smell can also indicate your goods are going off or there is a leak. As staff will be walking in and out throughout the day they will notice these changes first, so make sure to ask them to inform you. By recording this in a brief note in a daily log you will have evidence for the engineer.
Common Reasons Why Cold Rooms Fail
Most cold rooms fail due to a few common problems. If there has been a power cut or the circuit breaker has tripped the whole system will stop working. If there is a refrigerant leak this will cause your room to lose its cooling power. The condenser coil can become dirty meaning it cannot push the heat out. If your thermostat has broken it will give incorrect readings and tell your machine not to work. If your fan motor breaks, your cold room will get trapped with warm air. Lastly, if your door seals are worn then your cold room will lose cold air. Some issues can easily be rectified however some require specialist tools and knowledge.
What Should You Do in the First Ten Minutes?
Try to stay as calm as possible. Firstly check the power switch is on and the circuit breaker hasn’t tripped. Note the temperature reading from the display. Ensure the door is closed and nobody opens it. Check if there are any warning lights or error codes on the control panel. Take a photo of the screen so the engineer will have an idea of what to do. If your cold room is still warm then contact a company who provide Emergency Cold Room Repair. Provide them with the temperature, error code and size of your room.
Protecting Your Stock While You Wait
Whilst waiting for the engineer to arrive try to protect your stock. Think of your cold room as a large fridge. If the door is closed it will stay cold. To help give you extra time:
- Ensure the door is kept closed.
- Move the most valuable/fragile items to a working fridge/freezer.
- Wrap your pallets in insulation blankets.
- Place ice packs/dry ice on top of your delicate items.
- Take temperature readings every 15 minutes in a notebook.
Simple Checks to Make Before the Engineer Arrives
By doing a few quick checks you can save time and money. Check your main fuse box and flick any switches that have tripped. Ensure the evaporator fans aren’t blocked by boxes. Check your drain line isn’t blocked with ice or dirt. Wipe any dust that can be seen from your door seals and check for any gaps. Check nobody has moved your thermostat dial. Ensure all of your machinery is covered as there is high voltage and sharp parts inside. If you are not careful you can cause a small issue to become expensive or cause someone to get injured.
When to Contact a Professional Engineer
As soon as your cold room is not keeping its set temperature contact a professional. If you can hear grinding or hissing noises and there are oily marks near your pipes contact an engineer immediately. If there is a refrigerant leak you should contact a certified engineer as this gas can cause damage to the air. There are strict guidelines in place to ensure it is looked after properly. If there is an electrical issue you should also contact a trained engineer. Many cold room owners will wait and hope the issue resolves itself. Often this won’t happen. Often by waiting you can cause a small issue to become a broken compressor costing thousands to replace.
What Happens During a Repair Visit?
A good engineer will ask a few questions to find out when the issue occurred and what you have noticed. They will then check the power, controls and refrigerant pressure. They will also check your coils, fans and door seals. Once they have found out what the issue is they will explain how they will sort this. They will also give you a price. Often the issue will be resolved the same day. As the company provides Emergency Cold Room Repair they will have common spares in their van to get the job done quickly.
How to Prevent Further Issues
Preventing issues will save you money. By regularly caring for your cold room you will have a healthy cold room and your stock will be protected. Try to:
- Schedule a maintenance service at least twice per year.
- Clean your condenser and evaporator coils regularly.
- Check your door seals and hinges and replace when worn.
- Fit a temperature alarm which will send you a message.
- Ensure your stock is stacked leaving gaps for air to go around.
How Does ColdTec Help When Cooling Fails?
ColdTec provides support to businesses in the UK who cannot afford to have a warm storage area. Our team will respond to your emergency call and send a highly skilled engineer to find and fix the issue. In addition to providing Emergency Cold Room Repair we also design and build new cold rooms and freezer rooms for warehouses. We offer maintenance contracts meaning you have one reliable partner to take care of your cooling systems from day one. Many cold room owners who plan with ColdTec will often have fewer emergencies as our engineers will pick up on any weak parts and replace them.
FAQs
How quickly will my cold room warm up?
If your cold room is well insulated it can stay cold for a few hours if the door is kept closed. Smaller cold rooms with thin walls can warm up within an hour.
Can I fix my cold room?
You can check the power, thermostat and ensure there is no blockage in the airflow. Any other issues should be left to a certified engineer as gas and electricity can cause serious damage.
What should I do with my food if there has been a lengthy power cut?
Check the temperature log and ensure the food is within your food safety guidelines. Throw any items away that have been above the safe temperature for too long.
How much will an emergency repair cost?
This will depend on what the issue is, what parts are needed and what time of day it is. A good engineer will give you a clear price.
How often should I service my cold room?
Most businesses will have their cold room serviced twice per year. If you have a busy kitchen or warehouse you may want to have them serviced every 3 months.
Conclusion
Although it can be worrying to have an issue with your cooling system having a clear plan will help you to stay calm. Ensure you check the power, record the temperature and protect your stock. By having a fast cold room repair you can save your goods and reputation. By regularly caring for your cold room and having a reliable partner you can reduce the chances of further issues. ColdTec are always here to help businesses across the UK keep their cold rooms running.